Transit-time Flow meterApplications：u Water (hot water, cooling water, potable water, sea water etc.)u Petroleum productsu Chemicals, including alcohol, acids, etcu HVAC, energy measurement system...

Advantages No Moving Parts.External Clamp On, no need to cut into the lines or shut the process down to install.High Accuracy, 1% of reading.Very sensitive to low flow measurement.Field Programmable c...

There is a transforming formula between energy and flowIts energy (kw) = flow (L/s)*temp. difference (°C) *4.2

The Lanry TF1100 series Clamp-on Ultrasonic Flow Meter is designed for non-contact and non-intrusive flow measurement for pipes from DN20 to 5000 in diameter.Stationary type ultrasonic flow meter is u...

There are fivemain types of ultrasonic flowmeters from both an installation aspect and an operating principle aspect.According to different sensors type for installation, it can be divided into clamp ...

It mains reflected in below aspects.1. The flow measurement for Electomagnetic flow meter is asked to the measured liquid must be conductive.Magnetic flow meter has a minimum amount of conductivity th...

1. What is the distance between the transducers and the transmitter ?2. The material of pipe, pipeline wall thickness and pipeline diameter.3. The life of Pipeline;4. Type of fluid, whether it contain...

The flowmeter model selection is very important in the application of instrument. The related information shows that in the practical application of instruments,2/3 failures are caused by incorrect se...

● The flowmeter has a certain use range; please make sure the purchased flowmeter meets your working conditions(flux, pressure and temperature) before installation.● After unpacking, install as soon a...

AdvantagesDoppler meters may be used where other meters dont work. This might be liquid slurries, aerated liquids or liquids with some small or large amount on suspended solids. The advantage...